Fair Projects for 2015

It’s getting to be the time of year when you’ve got to start thinking about what projects you’re going to be making for your county and state fairs. Ideally you’d start too as working right up to the deadline is never fun, though it seems to happen more often than I’d like!

So far, most of my projects are rather bland looking, but I promise there are colorful projects coming too!

Here we have a lace baby sweater which will ultimately be part of a three-piece set, a knit lace doily, and a crochet lace bag all in progress.

I’ve also been working on filling the first of three bobbin lace pillows I’m making for myself. I really enjoy the bobbin lace beginners kit I got for Christmas, but the failings of a beginner ‘pillow’ are more than apparent. I done some research on the best and longest lasting bobbin lace pillows and how they’re made. Then, I presented this information to my physical therapist and we worked out a stand set up to prevent any undue stress on my body. Now I’m building that stand and pillow set up! This is the first pillow in progress.

Kaia seemed rather displeased with my pillow stuffing as a few bits of straw landed on her in her bed!

The pillows are filled with natural straw cut into 4″ or shorter pieces. Cutting the straw is a painful and dull process, and stuffing the pillows is painful and slow going as a result, but when they’re done, I’m going to have fantastic traditional bobbin lace pillows, a standard 24″ cookie pillow and a more rectangular pillow with a roller in the back for making yardage. The pillow above is the roller that will go into the rectangular pillow. The exterior is a natural canvas material sewn into a tube with drawstrings on either end. Inside, there is a dowel running the length and I have two discs cut from 1/4″ plywood. One disc is already in place at the bottom of the pillow and the other will go in just before cinching up the other drawstring. The dowel sticks out a few inches on either side which is how it will connect to the support pillow.

The last big WIP keeping me busy lately is a paper craft project. Some friends asked me to make a 4′ tall LEGO minifig as a decoration for a Boy Scout party in March. After that party, the gigantic LEGO man will be a county and state fair entry for me before finally being sold to the highest bidder to fund some new LEGO sets for me! The main framework of the minifig is cardboard sheeting from Costco. Some of guy pal’s friends from work taught me how to use anti-fatigue mat foam to create the complex curves and gave me some foam to use for the project. Atop the cardboard and foam frame is paper maché. This will create a surface I can sand to a perfect finish. With the glossy paint a LEGO minifig has, any imperfections in the body will show. That’s why I’m doing the paper maché coating. There will likely be some spackle to help fill any gaps prior to sanding as well. Here’s the first two pieces being coated in paper maché, the head (which is upside down in this photo) and one of the arms. They’re the most curvy pieces and thus require the most paper maché to get perfectly smooth.

So you want to sell your knits?

One of the things my advanced students ask me about the most is how they can make money with their knitting. So many enjoy knitting countless baby socks or scarves or shawls but then have no idea what to do with them all. There’s only so many scarves I need in my wardrobe and only so many more I can gift to the knit-worthy folks on my list. It’s not too wild of a leap to realize you need to sell some of these handknits to be able to buy more yarn and keep your needles sailing through that soft, smooshy yarn.

I was lucky enough to have the opportunity to go to college and parents who would support me in just about any major I wanted to try. I settled on business with an emphasis on marketing before long. Even though I didn’t know for sure what I wanted to do, I knew I’d be able to apply it to anything. I could work in film in a multitude of roles, be a physical therapist running my own clinic, I could continue managing a retail store, or I could start my own business. It seemed the perfect major with the widest variety of potential career options. Even though I didn’t fit in well with the business students who were in short rather closed-minded and not so brilliant compared to the students over in the pre-med classes I also took! Thankfully my science and film classes kept me sane!

Anyhow, I’ve had an eye out for resources to send my student’s direction for that constant question, “How do I turn my hobby into a business?” Some want something part-time, some want to replace a full-time job, some just want an activity to fill their retirement, and a few just want to pay for more yarn and higher quality needles. Whatever your reason, it comes down to the same information you need to get started. Things like where to sell your knit and crochet items, how to get yarn wholesale to increase your profit margin, how to stand out from the competition, and the most frequently asked question, “How do I price my items?”

I’ve found a great ebook offer right now that’ll answer these questions and more to help you go from a hobbyist to a business owner. And for a mere $37 to get all that information, 3 months of email coaching and support, a pricing calculator, a business plan, a color selector to avoid those dreaded multicolored horrors every craft show seems to have, and a great big pile of business building freebies from patterns you can use to all you need to know to set up your website, blog and storefront!

If you’re ready to jump in with both feet, check out this ebook and resources here. At this price you’ll only be giving up buying yourself one or two balls of high end sock yarn. And just think how many more balls of luxurious yarny heaven you’ll be able to buy after you’ve got our knitting business started!

Not quite sure if you’re really ready for the whole deal? Is that $37 too steep for you right now? No worries. I’ve totally got you covered with a free newsletter to help you get started too. The ebook is more complete, but hey, we’ve all got to start somewhere and this might be better for you. Everyone’s got to chose their own path!

El Paso County State Fair

At a local friend’s urging, I decided to enter some of my fiber arts work into the county fair. I figured that since I’ve only been knitting since February 2010, surely I would rank mediocre at best. I like to try some unusual and challenging pieces, but I still feel like such a beginner! I figured I didn’t have much to lose since the entry fee is only $5 though, so I got to work on some special projects.

My first project for the fair was a pair of socks I’ve been wanting to knit for myself for quite some time. I’d seen someone else win a second place ribbon in one of my Ravelry groups with some knee-high socks, so I figured that knee-high socks were an impressive enough sort of project to enter into a fair.  I ordered the yarn and made a few modifications to the pattern. The pattern was beautiful as written, but featured many floats over 5 stitches which is not structurally sound or traditional knitting. These socks also had a heel type I’d never tried before that is unique to traditional Norwegian stockings. It was great fun to learn the new heel and to do so much stranded colorwork. That’s my favorite kind of knitting to do. It takes just the right amount of attention to detail and works up into a nice, thick fabric. I like my knits to be cozy.

The hardest part of these socks was actually blocking them. I’d never blocked socks before, but I figured they needed to be done up nicely. I couldn’t find large enough sock blockers anywhere, so I ended up having to make them myself. Unfortunately, I’m not doing well enough physically since the most recent accident to be using my power tools. I broke a half dozen blades and failed at cutting on the lines I’d drawn on the plywood. The sock blockers aren’t great, but they’re enough to get the job done. Any puckering from the stranding blocked right out of the socks.

Then, because I was trying to work on the project anyhow to publish the pattern, I decided the bird I was knitting could be entered in the knit toy category of the fiber arts department. I’m currently working on getting the pattern typed up and materials to a test knitter. The pattern will be available for purchase and download by the end of the year. The entire bird is knit from Knit Picks Palette yarn on size 0 needles. It’s stuffed with wool as well, and has wool wrapped wire for the feet and crown feather. The eyes are 1/4″ rounded-top, shank-style buttons. I made the stand out of craft wood from Michaels Arts and Crafts and painted it out matte black so it wouldn’t fight with the cockatiel for the eye.

Finally, right after the most recent accident, a Ravelry friend of mine gifted me a pattern for a crocheted schnauzer as a feel better and know you’re loved sort of thing. I figured I’d better crochet a little dog and post pictures to show my appreciation. I didn’t really want a great big toy dog cluttering up the place though, so I unraveled some wool yarn and crocheted with only one ply of yarn on a size 7 steel crochet hook. This made an itty bitty toy dog and almost everything is better in miniature! I also rewrote the legs in the pattern, did the face embroidery differently, and needle felted in the beard. I made him a collar out of the finest red ribbon I had and stitched on a sequin to be his dog tag. His eyes are two black beads that were in with the rest of my seed beads but mysteriously a size larger than the rest. Working on such a small scale with such fragile single ply wool was a pain, but the end result was totally worth it. He came out so well I decided I may as well enter him too. After all, you can enter up to 10 items for the $5 entry fee. You only have to pay extra if you enter more than 10 different items in 10 different classes. You also only get $4 back if you win a first place ribbon though, and I wanted to up my chances of making back my $5. When you’re really broke, that $5 matters a lot!

When I finally got to go to the fair after judging on Saturday, I was greeted pretty quickly with my knit socks. They won first place in the knitted accessory category (socks, hats, gloves and such) and won the Adult Fiber Arts Department Reserve Champion ribbon. I had to ask what that meant exactly, and it’s second place out of all adult fiber arts entries: knitting, crocheting, spinning, weaving, tatting, felting, and rug hooking. How exciting!

Then I found my knit bird and crocheted dog in the glass display case. They each also had a first place ribbon for their category on them, knit toys and crochet toys respectively! I was thrilled!

We looked around at all the other entries for a while, and we couldn’t find the Adult Fiber Arts Department Champion. I really wanted to see what was nicer than my socks. We asked and were told that not all the ribbons were on the items yet. The woman helping us went to check the record book and when she came back, she was carrying the champion ribbon to hang on my crocheted dog! I couldn’t believe it! I won every single award my items were eligible for, three first places, the department champion, and the reserve champion!

I’m so excited. I can’t wait to pick my items up, show off the ribbons and projects at show-and-tell at the Front Range Fiber Artisans annual picnic, and get my winners (the socks and dog only) to the state fair. I’d send the bird too, but the state fair combines knit and crochet toys into one class, so I can only enter one of them. Fingers crossed for more success at the state level. It’s much more competitive and you don’t even get your items displayed unless you win.