Posts Tagged ‘fiber’

22
Feb

Fair Projects for 2015

Posted under Charity, Crochet, Knitting, Life, Models, Paper Crafting, Sewing and Quilting, Woodworking No Comments

Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/swamps42/maplewoolfarm.com/wp-content/themes/brown-stitch/wp-lightboxJS/wp-lightboxJS.php on line 40

It’s getting to be the time of year when you’ve got to start thinking about what projects you’re going to be making for your county and state fairs. Ideally you’d start too as working right up to the deadline is never fun, though it seems to happen more often than I’d like!

So far, most of my projects are rather bland looking, but I promise there are colorful projects coming too!


natural colored projects

Here we have a lace baby sweater which will ultimately be part of a three-piece set, a knit lace doily, and a crochet lace bag all in progress.

I’ve also been working on filling the first of three bobbin lace pillows I’m making for myself. I really enjoy the bobbin lace beginners kit I got for Christmas, but the failings of a beginner ‘pillow’ are more than apparent. I done some research on the best and longest lasting bobbin lace pillows and how they’re made. Then, I presented this information to my physical therapist and we worked out a stand set up to prevent any undue stress on my body. Now I’m building that stand and pillow set up! This is the first pillow in progress.

bobbin lace pillow stuffing

 

Kaia seemed rather displeased with my pillow stuffing as a few bits of straw landed on her in her bed!

dog with straw

The pillows are filled with natural straw cut into 4″ or shorter pieces. Cutting the straw is a painful and dull process, and stuffing the pillows is painful and slow going as a result, but when they’re done, I’m going to have fantastic traditional bobbin lace pillows, a standard 24″ cookie pillow and a more rectangular pillow with a roller in the back for making yardage. The pillow above is the roller that will go into the rectangular pillow. The exterior is a natural canvas material sewn into a tube with drawstrings on either end. Inside, there is a dowel running the length and I have two discs cut from 1/4″ plywood. One disc is already in place at the bottom of the pillow and the other will go in just before cinching up the other drawstring. The dowel sticks out a few inches on either side which is how it will connect to the support pillow.

The last big WIP keeping me busy lately is a paper craft project. Some friends asked me to make a 4′ tall LEGO minifig as a decoration for a Boy Scout party in March. After that party, the gigantic LEGO man will be a county and state fair entry for me before finally being sold to the highest bidder to fund some new LEGO sets for me! The main framework of the minifig is cardboard sheeting from Costco. Some of guy pal’s friends from work taught me how to use anti-fatigue mat foam to create the complex curves and gave me some foam to use for the project. Atop the cardboard and foam frame is paper maché. This will create a surface I can sand to a perfect finish. With the glossy paint a LEGO minifig has, any imperfections in the body will show. That’s why I’m doing the paper maché coating. There will likely be some spackle to help fill any gaps prior to sanding as well. Here’s the first two pieces being coated in paper maché, the head (which is upside down in this photo) and one of the arms. They’re the most curvy pieces and thus require the most paper maché to get perfectly smooth.

LEGO head and arm WIP

 

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
30
Apr

In honor of Spring

Posted under Free Patterns, Hexipuffs, Knitting No Comments

Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/swamps42/maplewoolfarm.com/wp-content/themes/brown-stitch/wp-lightboxJS/wp-lightboxJS.php on line 40

How about some new hexipuff charts! Here’s my newly charted delphinium:

delphiniums

and some stylized flowers as well!

sylized_flowers1

Remember, it’s wonderful feedback and donations on the side bar that keep your free hexipuff charts coming. Thanks all!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
01
Mar

New Month, New Projects

Posted under Life, Sewing and Quilting, Spinning No Comments

Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/swamps42/maplewoolfarm.com/wp-content/themes/brown-stitch/wp-lightboxJS/wp-lightboxJS.php on line 40

It’s officially the first of the month, though I’ve got to say as I’ve not slept yet it’s feeling a lot like February still. I am taking advantage of the time I need to stay up to make sure the laundry gets done so I’ve got work shirts tomorrow. The Craft Yarn Council just changed up my class offerings in a big way, so I’ll be doing a demonstration tomorrow looking for class signups and working on some of the new samples. Tomorrow looks like it’ll be pom pom rug making day.

I started spinning a wonderful single of natural colored BFL wool which will become a 2-ply light fingering weigh yarn for my mom to knit into a scarf for my grandmother. I’d spun some yarn before, but as a DK weight yarn, I’m afraid it’ll be too thick and warm for her to wear in Southern California. Thanks to my new electric spinner, I’m almost done with the first ply, about 45 grams of wool if I recall correctly. Not too bad for a quick evening spin!

IMG_4609

 

When I needed to get up to change the laundry, the yarn kept coming undone when I wrapped it around my flyer like normal. It’s not the most wonderful way to hold the yarn when you have to get up, but sometimes it works. Then I thought about the package of new clamps I’d just ordered sitting right beside my wheel. Perfect. They’re just easy enough to open without sacrificing clamping power for me to be in love with them. Then as an added bonus? I find out the reinforced nylon handles weigh just enough to keep the very high twist yarn from untwisting under the weight of the clamp on the platform. I clipped the yarn into the clamp and then just set the clamp down. You can’t get an easier and more foolproof way of setting your spinning aside! I’ll definitely be keeping one of these guys in my spinning supply box from now on. I’ll post a full review of the new clamps too once I get to try them on my woodworking, but I figured you guys would love to see my new spinning solution!

Then, since I just tossed my work clothes into the dryer, I figured I’d get some fabric I bought last week into the wash so I can cut it up and get sewing. My physical therapist has a small pillow which we use every week under my shoulder because I can’t lay flat on my back on a hard surface without something under my right shoulder. The pillow in question here is an airline pillow that was stolen ages ago and is starting to really show it’s age in the fragile from the start blue cover. It’s just falling to shreds. So I’m going to make a pair of washable covers for his extra positioning pillow!

Here’s the fabric I picked out for him.

IMG_4603

 

The black with glow-in-the-dark skeleton fabric will be for the body of the pillow. Then, for the border along the open edge, I found this wonderful black and white grid which to me looks a lot like graph paper. I think it’s the perfect combination. We’ve got the anatomical organic shapes from the human body and it’s infinite complexity mixed with the rather stark, mathematical grid of the relatively nonsensical numerical grades and measurements for everything to keep insurance companies happy. Sure, it’s a little deep for a pillowcase, but I’m thrilled with it so far. It can only get better from here. Plus, it looks like I should have enough fabric leftover to make a cover for my equivalent little pillow at home and maybe a couple ice pack covers for me too! Sometimes little treats like a goofy ice pack cover can make all the difference on a high pain day.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
25
Feb

Ravellenic Games are OVER

Posted under Weaving No Comments

Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/swamps42/maplewoolfarm.com/wp-content/themes/brown-stitch/wp-lightboxJS/wp-lightboxJS.php on line 40

Whew. It’s been an insane couple of weeks for me with the Ravellenic Games in full swing. I challenged myself to get all 34 unique medals this year and I just barely made it! I was so busy spinning, knitting, crocheting, and weaving though that I’m quite a bit behind on posting. This means one thing for my readers: get ready for the deluge of awesome projects.

I’m going to kick off with my absolute favorite project of the games this year, my mini notions bag! You got a bit of a preview in the Rainbow Yarns post earlier. I posted those pictures of the yarn with the new electric spinning wheel right before the insanity started and I was challenged by a friend to get all 34 medals. So what did I do with this yarn? Well, not quite yet!

I didn’t want to use just rainbow yarn for a project because I’m just not very into the bright and crazy colors. My best friend teases me relentlessly about my ever so boring love of earth tones. So I went up to my favorite local fiber and yarn shop, Table Rock Llamas, and picked up some jet black merino wool. I quickly spun this into a 2 ply fingering weight yarn. It spun up fast on the new espinner and when a friend was helping me wind it into a center pull ball, we both marveled at how even it was as it flew through the tensioning fingers at high speed. I don’t think I’ve ever spun so much yardage so evenly, much less so quickly. There was approximately 125 yards from 0.8oz of fiber and I used every last drop.

For my project I opted to use the new black yarn with the rainbow crepe yarn. I set aside the rainbow light fingering yarn from the previous post for hexipuffing of course. How could I not? Here’s that crepe yarn again made from rainbow wool and two plies of polyester machine embroidery thread.

My best friend, K, was visiting the night I did this and so she helped provide extra hands to warp my four harness table loom with the black handspun yarn. We learned a very important lesson that night. Never, ever warp a loom with energetic yarn. You’ll be wrestling with it for hours trying to get the kinks out and tension applied evenly! Still, eventually we succeeded and I began weaving a plain tabby cloth immediately working with a shuttle of the rainbow crepe. I made this particular shuttle from lacewood last year for a specific project, hence the absurd length. But it was the only one I could find and I wanted to weave right that second. If I’d had patience, I’d have soaked and possibly weighted the black warp too! Or, you know, put on something other than jammies for the picture.

Before long I had a beautiful finished fabric but more space to go on the loom before running out of warp. Since it was handspun warp I felt extra horrible about wasting it and spent a while glancing frantically about my room trying to find something I could weave across my black warp to make a useable finished fabric.

I settled on a mini skein of solid black aran weight handspun and a second mini skein of DK weight black and gold thread with sequined yarn, both spun at Distaff Day this past January. I quickly worked them up for a bit in a striped pattern until I lost my patience and just had to cut my rainbow fabric off the loom.

From here it went right into the bathroom sink to be hand felted before being stretched out to dry. Given our difficulties warping the highly energetic black, it was a rather surprisingly flat and even fabric that wasn’t trying to curl up on itself. I had expected it to skew like the bias that forms in knits with energetic yarn worked flat.

I spent a day agonizing over how to cut up my fabric. I finally settled on three rectangles to make three little bags, a black and gold coin purse, a small rainbow notions bag, and a large project or double-pointed needle storage pouch. All three would have cotton liners and zipper closures.

Since I was trying for all the medals and the multiple bags would have all earned just more duplicates of the same medals, I didn’t finish them all. Each woven fabric has been sewn into the outer bag and the lining fabric for each liner cut. I did completely finish the bitty rainbow notions bag though and I couldn’t be more pleased with the result.

At about three-and-a-half inches square, it’s just the right size for a tape measure, stitch markers, a package of yarn needles, and a bit of lifeline thread – you know, just the knitting bag basics! It’s my first ever handwoven from my own handspun. I just love running my hands over the lightly felted fabric.

This was also my first ever bag with a zipper and I’m thrilled at how nicely that came out. I didn’t have any directions or idea what I was doing. I just made it up as I went along and it was so successful I’ll definitely line bags that way in the future too!

Keep an eye out for a bunch more posts loaded up with wonderful finished objects from my 2014 rainbow of Ravellenic projects!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
10
Jan

Spinning Study Group

Posted under Spinning No Comments

Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/swamps42/maplewoolfarm.com/wp-content/themes/brown-stitch/wp-lightboxJS/wp-lightboxJS.php on line 40

On the second Thursday of each month, I’m lucky enough to get to join a spinning study group at Table Rock Llamas. The ladies in the group are wonderful and I’ve learned so much just being around them. Almost every month, we have a dedicated thing to work on learning. Two months ago, we had a workshop taught by a study group member on how to spin coil or beehive yarn. Here’s my beehive yarn from November being modeled by my older dog, Sketcher.

In December we just goofed off and held a gift exchange. I ended up with something I had no idea I needed so badly, a yarn bowl! I’ve been using it non-stop since I got it and I’m considering getting one made from the same local artisan for holding two separate balls so I can use it for fair isle work, particularly as I’m planning at least two stranded projects for my county and state fair entries this year. If you haven’t tried a yarn bowl, you need to!

As for this month? We did a study of Blue Faced Leicester wool. Blue Faced Leicester is pronounced “blue faced lester,” and commonly referred to as just BFL. BFL is a fantastic fleece for the handspinner. It’s got a magnificent crimp and shines almost as though it contains silk. BFL is known for it’s luster. BFL is considered a longwool and the narrow locks range from 3-6 inches on average. The wool I’m spinning today has some variance but lends itself toward the long end of the spectrum. While the wool is rather soft and could be worn against the skin, I’ve gotten a bit spoiled with affordable Merino wool top and if I’m going to really splurge like I had to on the BFL, I’d rather just save a bit longer and snap up a bag of cashmere or higher micron count Merino than I usually buy.

The shop owner where we hold our meetings bought two BFL sheep fleeces for us and washed them. Here’s the view into my sack of BFL after today’s spinning. I’ve got a ton left to card and spin. Just look at that shine though! Wow!

Washed BFL

Members of the study group could buy as much as they wanted for $4 an ounce. That’s a lot more than I usually pay for sheep’s wool, but it was a matter of wanting to spin with the rest of the group.  I’ve spun BFL before, so it wasn’t a huge deal, but I’m very, very glad I splurged on some of this local wool from a sheep named Poppy! (my donkey’s name is also Poppy) BFL is fairly uncommon in our area so fleeces command a higher price. I ended up buying 4oz. That’s about as little as I ever buy of any spinning fiber because 4oz provides plenty of freedom to decide how to spin the yarn and a multitude of possible projects. I could make a lace shawl, a pair of fingering weight socks, or a worsted hat. The only time I buy less than 4oz is when I buy little bitty 1/3oz bumps of fiber for spinning hexipuffing yarn, but that’s for another post.

Given the high crimp of the BFL in our study group fleece and the burning desire I’ve had to try out the Majacraft lace kit my brother D got me for Christmas this year, I opted to spin my BFL into a lace weight yarn which will then most likely end up knit into a shawl of some sort depending on the finished yardage. Due to the quantity of vegetable matter in the wool even after washing, spinning is a bit slow. I’m carding my wool into woolen rolags and picking as much VM from the wool as I can both while carding and while spinning. With the high crimp and the wool’s luster it is working up to be a fantastic fine thread of a single even if it is slow going due to the relatively dirty wool.

IMG_4333

I will later ply this, likely a chained 3 ply, to make a finished lace yarn. I will probably also dye this fiber as I’d like to see first hand how the BFL takes up dye. I’ve heard good things about BFL’s receptivity toward acid dyes and that the wool’s natural luster makes the colors shine from within.

 

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
09
Jan

My Bitty Hat and a Surprise Mini Knit!

Posted under Holidays and Celebrations, Knitting, Life, Miniatures No Comments

Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/swamps42/maplewoolfarm.com/wp-content/themes/brown-stitch/wp-lightboxJS/wp-lightboxJS.php on line 40

I’ve always loved miniatures since I was a little girl. I had the most incredible dollhouse, and though it was never finished I didn’t care. I spent hours upon hours making little clay food, weaving bitty rugs, and of course making up fantastic stories about the lives of the bear, bunny, and kitty dolls that lived in my dollhouse and the various other character dolls who lived in unseen homes on the horizon of Dollhouse World. Here’s me with that glorious house just after I got it for Christmas in 1989.

Xmas1989

Ever since then, I’ve been fascinated and a little obsessed with all things miniature, particularly 1:12 scale.

Since I learned to knit and crochet, I knew I wanted to make miniatures. Of course minis are significantly harder and I failed over and over as a beginner to make successful minis. I’ve finally gotten down to the scale I want though and have even dared to dream smaller now! Check out this hat I made last summer:

I made this hat from a Buttercup Miniatures pattern. I did modify the stranded section of the hat to make it look more like my childhood winter cap. I worked on 6/0 (.75mm) knitting needles and used a single strand of 6 strand DMC embroidery floss as my yarn. DMC floss makes great miniature knitting yarn and the color selection is nearly unlimited and highly affordable! Someday, I’d love to order some of Buttercup Miniatures super fine knitting needles. My smallest are only 6/0 needles (.75mm). I’d love to try out their .38mm, .55mm, and.60mm size double-pointed knitting needles and fine ‘yarns’ just to see how much smaller I can really go.

My big goal for 2014 is to publish one new pay-per-download pattern per month so I’ll have income to pay for things like utilities once my home is built and I have a place to live and work again! For January’s new pattern, think small! I’m working on something which would be right at home in a little girl’s dollhouse, tucked into bed with her barbie, or snuck into the corner of a whatnot shelf for us adult collectors. Of course  I know most of you don’t want to work quite as small as I enjoy working, so this pattern is being designed with fingering weight yarn in mind. Of course your finished project would still be flat out adorable in a DK or worsted weight yarn. Made in a thicker yarn, this knit would still be a great accessory item for a 18″ American Girl doll. Keep an eye out! This upcoming pattern is only the first in a series of at least four new miniature knit patterns! Additionally, this pattern will be published in two versions, one worked in the round, and one worked flat!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
13
Jul

Tour de Fleece

Posted under Holidays and Celebrations, Life, Maple Wool Farm Products, Spinning, Yarn No Comments

Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/swamps42/maplewoolfarm.com/wp-content/themes/brown-stitch/wp-lightboxJS/wp-lightboxJS.php on line 40

I’ve been participating in the Tour de Fleece this year and having a blast. This is the first time I’ve ever been really happy with my spinning. I’m making real live usable yarns! Here’s my favorite shot so far. It’s a blend of various colors of wool into a single top. This is the single which I later chain plied (Navajo plied) into a 120 yard single. It’s a light fingering weight when plied like that. My camera is on it’s last legs, so it’s a challenge to get nicely focused close-ups of my handspun yarns.

 

 

 

I’ve spun various wools, flax/linen, and baby llama so far. The baby llama was by far my favorite. It drafted like a dream into a super fine thread that when Navajo (chain) plied made a perfect light fingering weight. Lovely! My big goal is to be able to reliably spin a 2 or 3 ply sock weight yarn. If I can manage that, I’ll reward myself with 8 oz of Knit Picks Stroll top to dye and spin. I’ll need more stuff to spin anyhow. It turns out spinning regularly in the right chair with the right posture is helping with my hip pain. More spinning it is! Talk about the most fun physical therapy exercise ever!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , ,

WordPress database error: [Column 'referer' cannot be null]
INSERT INTO `wp_h8au5a_power_stats_visits` (`date`, `time`, `ip`, `country`, `device`, `referer`, `browser`, `browser_version`, `is_search_engine`, `user_agent`, `is_bot`, `os`) VALUES ('2019-12-14', '2019-12-14 16:18:43', '3.91.106.223', 'US', 'desktop', NULL, NULL, '', '', 'CCBot/2.0 (https://commoncrawl.org/faq/)', '', '')